Products

World experts in digital hand-held diagnostic scopes

Horus Digital Diagnostic Set_DSC100


Main machine


Main machine

 
Size 16 (cm) x 9 (cm) x 19 (cm)
Intended useDigital photographs for eye-fundus, ear canal and tympanic membrane, epidermis and dermis of skin.
Imaging system Light source Nature white LED light, instant lighting
Brightness range15 steps
SensorCMOS
Resolution2M pixel (1920x1080 pixels)
Focus systemContinuously adjustable
Screen Integrated display 3.5” full color TFT-LCD
24 bit full color panel, support to 167,772,216 colors
Output Live image export AV out
UVC live
Storage typeMicro SD card, 8GB and support to 32GB
Image mode
- Format
- Capacity
  • Photo
  • JEPG
  • 12,000 pictures (8GB)
  • Video
  • AVI H.264
  • Continue recording, support to 1GB
Data transmit 1.mini-USB
2.micro SD card reader
3.Support to Wi-fi transmit through MiiS Wi-fi accessory
Power Battery 3.7 V/ 2600mAh Li-ion Battery with safety protection
ChargerBy mini-USB
Recharge modeContinue charge in capture mode
Energy indicator3 stage display
Energy saveYes
Operation system Supported OS Windows XP, Windows 7/8, Android and i-OS
Compatible scopes Fundus scope 25 Fundus scope 40 Otoscope Dermoscope General scope Gonioscope Endoscope adopter

Scenario

Emergency
Pediatrics
Ward round
Clinics
Telemedicine
Education
Veterinary

Spec description

This innovative product “Digital Hand-held diagnostic set” is Class-II (ophthalmoscope)/Class-I (otoscope and dermoscope) Medical Device.

It is expected to substitute for the traditional ophthalmoscope, otoscope and dermoscope by the use of the digital photographic solution. This medical device is provided to capture the digital photograph or video of eye-fundus, ear canal and tympanic membrane, epidermis and dermis of skin. Following the global trend of electronic medical records and telehealthcare networks, this people-oriented medical imaging product will be widely applied in doctors’ offices, clinics, skilled nursing facilities and healthcare station.


Q & A

Took a long time to enter image capturing mode

It takes around14 to 19 seconds to turn on the control unit and enter image capturing mode, please contact your dealer if you generally experienced differently.

Stuck on boot screen or turned into black scree during operation

Please ensure the lens is correctly attached to the control unit, and turn the lens Formatted: Font: Bold, Font color: Background1Formatted: Normal, No bullets or numberingclockwise (when facing the rear side of control unit) until it’s completely locked.

Can I charge the control unit while using it?

Yes, you can charge the control unit when use it after activating UVC mode. To activate UVC mode, please enter Menu and then go to 10. UVC enable.

Power indicator keeps flashing after shut down

This is an reminder for user to charge the control unit. (It requires 5-hour charging before the first use)

How to make sure the machine is fully charged?

The power indicator will be off when the control unit is 100% charged.

No indication of the power indicator when using the charging cradle

Please check if the mini-USB is correctly connected between the control unit and the charging cradle.

Orange light and blue light flashing alternatively while charging, but the control unit is still low on battery even after charging for hours

Please check if the battery is installed in the control unit.

I had disabled standby mode, but the control unit still switched to standby mode

Standby Disable setting returns to default value after re-boot the machine

How to adjust the position of lens when mounted horus scope to slit lamp?

First, align the center of lens with the mark of eye height, and then, it’s just the same as operating a slit lamp for image capture.

Through the scope